HP LaserJet 1022nw: legacy wireless monochrome printing with manual duplex review

Legacy wireless sharing with manual duplex

The HP LaserJet 1022nw fits compatible computers on a deliberately configured 802.11b/g wireless network, with wired Ethernet and USB available as separate arrangements. Its ordinary main and priority inputs provide 260 sheets combined. The deciding tradeoff is that both network compatibility and attended duplex need preparation: the radio is from an earlier generation, and the user must reload pages for their reverse sides.

HP's exact US product page identifies Q5914A#ABA and explicitly marks it discontinued. This is an earlier configuration reference without a current-stock claim. Its US specification lists the 110–127-volt, 60-Hz edition separately from a 220–240-volt, 50-Hz regional version. The original guides also warn that operating power sources are not interchangeable.

Match the actual wireless arrangement

The original exact nw configuration adds integrated 802.11b/g to the 1022n's USB and internal 10/100 Ethernet network port. Its model-specific wireless guide describes infrastructure mode, where the printer communicates through a wireless access point and compatible computers use that network.

Establish the matching network name, authentication and computer driver. The original wireless guide names WEP and WPA, with advanced settings through the embedded web server. It does not establish modern WPA3, WPA2-only or 5-GHz compatibility. Check the actual access point and acceptable network configuration before relying on this radio.

The exact guide explicitly says wired and wireless networking cannot operate together. Plugging a LAN cable into a printer communicating wirelessly switches it to wired communication. For Ethernet, use a functioning network, suitable CAT-5 cable, actual hub or router and compatible computer driver. USB remains a separate direct route, with the required cable purchased separately according to HP's current specification.

The original ad-hoc computer-to-computer mode is described separately from infrastructure networking. It is not relabeled Wi-Fi Direct, and it does not prove AirPrint or Mopria. Those mobile protocols and PIN-held document release remain unconfirmed. Rendezvous discovery and web management are not substitutes for an independently supported mobile print route.

Ordinary capacity is different from envelope handling

The current exact nw standard-input section and original capacity table specify a 250-sheet main tray plus a ten-sheet priority feed. A loading paragraph also describes one special-media sheet. The independently repeated ordinary ten-sheet capacity supports the combined 260-sheet arrangement.

The original service guide explicitly names Letter, Legal and A4, with both feeds described for supported media sizes. Load ordinary 20-lb/75-g/m² paper face up with the top toward the printer. Adjust the guides to the actual size and straighten the full stack when adding paper. Mixed media in the two feeds do not provide the combined total of each type simultaneously.

One supported envelope uses the priority slot. For a batch, the original routine allows up to 15 in the main tray. Keep the print face up, top along the left guide, and a short-edge flap entering first when present. Set the actual size and Envelope type in the compatible driver, adjust the guides and replace the input cover. The ordinary sheet total is not an envelope count.

Reloading is still required on a network job

Choose Print on Both Sides (Manually), or Manual Duplex in the appropriate historical Mac driver, and the intended binding. After the first sides print, gather and straighten the output. Reload printed side down with the bottom edge entering first, replace the input cover and press Go for the reverse sides.

This is an attended two-pass process. Wireless delivery does not make the paper path automatic. There is also no scanner, document feeder, flatbed, copier or fax; the original monochrome print-only architecture cannot satisfy a scanning need.

HP declares up to 19 one-sided Letter pages per minute and separately 18 A4, rather than measured two-sided throughput. The current exact-model recommended range is 250–2,000 monthly pages. The 8,000-page maximum duty and historical 1,000-page average remain separate quantities.

Check replacement toner and operating clearance

HP's exact US compatibility list maps the 1022nw to 12A Q2612A. The cartridge technical section declares approximately 2,000 pages based on ISO/IEC 19752, with actual yield varying by content and conditions. Installed and remaining toner in an individual discontinued unit are not promised. No live supply price or cost per page is assumed.

The original body is 14.6 inches wide, 9.6 deep and 9.5 high. Allow additional loading, output-support, cable and cartridge-access space. Weight remains unconfirmed across differing cartridge bases. The nw is useful when its actual legacy network requirements are acceptable; essential modern mobile compatibility or automatic duplex needs separately confirmed hardware.