Xerox Phaser 6250N: wired color with a manual two-sided workflow review

Keep the N configuration distinct from the duplex models

The Xerox Phaser 6250N offers wired color printing with a useful split between a large everyday tray and a smaller multipurpose source. The US configuration includes a 500-sheet main tray and 100-sheet MPT, giving 600 nominal sheets. USB 2.0 and 10/100 Ethernet support documented compatible computer printing.

The N does not include automatic print duplex. That distinction matters more than a general family feature list: the original table includes automatic two-sided output on DP, DT and DX while listing an upgrade for N. A used N needs its actual installed options checked before being treated as an automatic duplex machine.

Use the standard sources for ordinary documents

Letter, Legal and A4 ordinary paper are supported in both standard sources. Their nominal combined capacity is useful when a shared office wants a substantial everyday supply without an added feeder. A precise paper-weight basis for the 600-sheet declaration is unestablished, so respect the tray fill limits as stock thickness changes.

The paper guide separates plain paper at 64–90 gsm from heavy plain at 85–130 gsm, with further categories for other media. Permission to feed a material does not mean it can use every source or a second-side routine. Match the physical stock to the panel type and the selected driver source.

An extra 500-sheet feeder and a 1,000-sheet feeder assembly are options. They are not included on this N, and the original tour says those assemblies cannot be stacked with one another. A family photograph or maximum-input figure should not replace an inspection of the actual drawers.

Manual two-sided work needs a deliberate reload

The manual gives separate routines for the MPT and main tray. With the MPT, print the odd-numbered pages with the printable face down and the top entering first. Reinsert that printed stack with side one facing up and the top toward the back of the MPT, then print the even-numbered pages from the same source.

The main-tray procedure starts with the printable face up and the top toward the front. Reinsert with the printed side down and the top still toward the front, then select that tray for the even pages. These orientations are different; a small trial job can establish the application's page order before a long run.

Follow the original stock and coverage guidance for manual second sides. This process requires the operator to handle the stack and does not supply an automatic duplex rate or unattended two-sided output.

Reserve the MPT for supported envelope jobs

The envelope instructions specify the MPT, no more than ten at once, with the printable side down and flap to the right when facing the printer. Use suitable laser paper envelopes without windows or metal clasps, and choose the matching envelope size, type and MPT source.

Envelope output is one-sided. The main tray's ability to hold Legal paper does not make it the documented envelope path, and a booklet setting does not authorize sending envelopes through an optional duplex unit.

Check software and disk-backed job features separately

The N includes 256 MB memory and documents USB, 10/100 Ethernet and a legacy parallel interface. Use a driver appropriate to the computer and correct network addressing. The historical driver and remote-printing descriptions do not establish native AirPrint or Mopria, or current operating-system compatibility.

Secure, Proof and Saved printing require the optional internal hard drive. The documented protected workflow uses a four-digit numeric password in the driver and release at the printer panel; the secure job is removed after printing. Other disk-held jobs can survive power-off. This is a different arrangement from a volatile RAM disk or an administration password.

The machine is print-only. Its single-pass catalog wording describes the color print engine, with no scanner, document feeder, copying or fax hardware supplied.

Keep speed, workload and supplies on their own terms

The original manual declares up to 26 Letter pages per minute in color or black-and-white, versus 24 A4. Those are manufacturer one-sided declarations, not measured results or duplex rates. The separate 100,000-page duty declaration does not establish a recommended monthly workload.

The 2005 US supply list declares standard black and each color at 4,000 pages, or high-capacity black and each color at 8,000, using approximately 5% coverage on an A-size page. This is not an ISO/IEC 19798 declaration or proof of supplied-cartridge yield. Imaging, transfer and voltage-specific fuser items are separate maintenance considerations.

The original US part list identifies this N as 110 V. Verify the machine label, software and physical condition, and leave working room for trays, output and service covers. Exact US N body dimensions remain unestablished in the read sections, so measure the actual unit for a tight installation.